support@flyingrobot.co.za
support@flyingrobot.co.za
Save up to 0%
Save %
Lens is cut using industrial strength lasers. The result is a clean and extremely sharp finish absent of "Micro-scratches". (The tiny spots on your...
View full details
Save 30%
Save %
These XT60 connectors come pre-soldered to 4mm bullet connectors with silicone wire. Perfect as charger cables.
Save 30%
Save %
This board allows a TBS Unify Pro (5V or HV/Race) and receiver to be mounted in a stack for a low profile and clean solution. The pads let you to ...
View full details
Save 30%
Save %
1 x Pair of carbon replacement arms for the ZMR250
Save 0%
Save %
Designed by : Michael Anderson Made by: TBSDesigned to be small, light, and easy to use. You CANNOT expect full range from this antenna. In fact, ...
View full details
Save 30%
Save %
4 x 4mm Carbon fibre arms Designed inhouse for the Cobra 22 size motors. To protect the bell housing on the motors from taking knocks. Compared ...
View full details
Save 0%
Save %
Race Wire is the perfect upgrade for your racing or freestyle rig. It simply replaces a section of your motor wires under the tips of the propelle...
View full details
Save 31%
Save %
This plastic canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates ...
View full details
Save 31%
Save %
Foxeer TM25 Switcher breakout Cable
Save 44%
Save %
White plastic replacement frame for the DYS ELF micro brushless drone.
Save 29%
Save %
Replacement canopy for the DYS ELF micro drone.
Save 58%
Save %
The classic 1.3GHz Crosshair from VAS has received an update. The Crosshair was always known for its power and penetration, and the Crosshair XTREM...
View full details
Save 30%
Save %
Don’t let the small size fool you, the BlueBeam Pro is a high performance CP antenna for your 1.3GHz which sacrifices nothing on account of its siz...
View full details
Save 30%
Save %
This filter improves video reception for 1.2-1.3GHz video receivers in combination with TBS Crossfire. Due to the poor filtering on the video anten...
View full details
Save 30%
Save %
Alloy Case For Monster V2 Camera
Save 30%
Save %
Alloy case for Foxeer HS1177 V2 camera
Save 51%
Save %
The Lumenier Race Pod Cover is made from an ultra-durable Polycarbonate material and precisely injection molded. The Race Pod is a direct fit for ...
View full details
Save 30%
Save %
Replacement metal case for Foxeer Arrow V3 FPV camera
Save 19%
Save %
2x Frenzy Brace
Save 30%
Save %
Compatible with all Alien PDB's
Save 20%
Save %
2x Frenzy Arm 2x Frenzy spacer
Save 19%
Save %
1x Battery pad 2x Standoff 8x M3 Clench nuts 16x 12mm screw 8x 16mm screw
Save 30%
Save %
The Universal Vee Antenna from VAS allows a new level of freedom for pilots. Instead of having to buy a new antenna every time you change frequency...
View full details
Save 31%
Save %
Replacement crystal for the CC1558 800tvl board camera
Save 30%
Save %
The Crossfire RACE antenna is a new design for miniature setups or builds where weight is more critical than range. It will give you range about as...
View full details
Save 1%
Save %
Power your GoPro in flight using this ultra-thin, right angle USB Type C cable
Save 30%
Save %
Foxeer Legend 2 Lens
Save 29%
Save %
Standard ZMR250 front or FPV Carbon camera mounting plate.
Save 20%
Save %
The Genesis is an 11dbi Linear Array designed for today's modern 5Ghz band High Definition FPV systems. This single panel array houses five Vertica...
View full details
Save 30%
Save %
The Cyclops is a circular array designed specifically to work with the new DJI FPV HD system. This single panel array houses four left hand circula...
View full details
Save 30%
Save %
Replacement Vortex 230 Mojo 4mm carbon fiber arm and blue, original color, plastic ESC cover. Includes 1x Vortex 230 Mojo - Crash Kit 3 - CF Arm
Save 30%
Save %
Cross-polarized (dual polarized) MIMO receiver antenna for diversity goggle modules. Can be mounted to goggle modules and will work like two linear...
View full details
Save 29%
Save %
TBS Unify Pro32 Nano and Crossfire Nano RX mounting board for toothpick style rigs. (26 x 26 mounting pattern).
Save 30%
Save %
Foxeer Legend 2 Lens and Lens Module
Save 30%
Save %
2x FrenZy Outer Camera Pod Plates
Save 19%
Save %
1x Left inner camera pod plate 1x Right inner camera pod plate
1x CL1 SpareTop Plate
Includes: 1x 2mm side plate
Save 30%
Save %
Replacement Lite-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 4 x TBS Source PodRacer 5" - Spare Lite-Arms 1 x Screws set
Save 30%
Save %
Replacement Y-Arms for the TBS Source PodRacer 5". Thickness: 5mmINCLUDES 2 x TBS Source PodRacer 5" - Spare Y-Arms 1 x Screws set
Save 30%
Save %