support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Less weight, powerful, smooth and strong flight performance! The F1507 2700KV/3800KV Motor by T-Motor is specifically designed to perfectly fit you...
View full details
Save 0%
Save %
1x JR servo lead 22AWG male to female 60cm
Sold out
Distilling the smallest, lightest and most powerful video transmitters (aka "the golden standard" :) ) down to a bare minimum for FPV racing, at ...
View full details
Save up to 0%
Save %
Save 0%
Save %
This is a bundle set of JST GH 1.25 connectors and pre-crimped silicone wires. With the kit, you will be able to build your own custom cables, rang...
View full details
Sold out
M10-5883 uses multi-constellation GNSS powered by u-blox MAX-M10S. MAX-M10S supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and...
View full details
Save 0%
Save %
300 pcs. 2mm hardware for your 2" and 3" builds Contains: 80x M2 Nut 80x M2x6mm screw 20x 6mm standoff and 6mm stud 20x 8mm standoff and 6mm stud ...
View full details
Sold out
SPECIFICATION Propeller Diameter: 65MM Pitch : 1.5 Blades : 2 Material : Poly Carbonate W...
View full details
Save 20%
Save %
Nano Pod lite (14mm Camera mount)
Sold out
Tip Type:TS-KU Length:about 105.5mm Weight:10g It's a internal-heated heating core specially for TS100,tip and heater as a whole.
Save 0%
Save %
A SMA to SMA extender with magnetic base. You may use this extender on your Crossfire, 2.4gHz or 5.8gHz devices with minor signal loss SPECIFICATI...
View full details
Save 0%
Save %
RP-SMA to RP-SMA straight connector
Sold out
NOTE: M4 (4mm) Fits both M7 and M9 Hall Sensor Gimbals Details FrSky CNC machined Aluminum Gimbal Stick Ends for Transmitter Stick with anti-locki...
View full details
Save 0%
Save %
Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...
View full details
Sold out
Spare Blades for Hobby Knife.
Save 0%
Save %
The X10 is a powerful High Voltage Digital Wing Servo with aluminum case and Coreless motor of exceptional quality for its price At only 10mm thic...
View full details
Sold out
A sleek new way to solder on the go! This new 1.5 meter cord is as simple as plugging one end into your soldering iron and the other into an XT60....
View full details
Sold out
Flycolor FlyDragon Slim 60A 2-6s Waterproof ESCSpecification:- Battery: 2-6s- Con. Current: 60A- Burst Current(10S): 80A- BEC: No- Weight: 56g- Siz...
View full details
Save 0%
Save %
Highlights Capable of 120 continuous amps w/ 10 awg wire 5MM bullet connectors Ergonomically pleasing and easy to grip Protected to avoid shorting...
View full details
Sold out
Channel: 10(IBUS), 8(PPM) RF Range: 2.408-2.475GHZ RX Sensitivity: -92dBm 2.4GHz protocol: AFHDS 2A Signal output: IBUS / PPM (Failsafe only work...
View full details
Save 0%
Save %
8x M3 8mm screws
Save 0%
Save %
6cm Linear Antenna
Save 84%
Save %
Frequency: 5.8GGain: 16dBiOnly use on your video receiverSMA/RPSMA Directional antenna Package Includes 1 x 5.8G Right Hand Helical Antenna1 x Cab...
View full details
Save 0%
Save %
Description: Brand Name: AmassItem Name: XT60+Body Material: Gold-plated copperInternal Material: Nylon/PAInternal Resistance: 0.8mΩMax. RC/MC: 60A...
View full details
Save 0%
Save %
Included: 1 x Red Male 1 x Red Female 1 x Black Male 1 x Black Female
Sold out
Specifications Power dissipation: 45mA(binding), 85mA(wifi mode) RF Frequency: 2.4GHz (2400~2480MHz) Input voltage: 4~9V DC @ 5V pad Receiver pro...
View full details
Sold out
HQProp Strap 25X2 CM (4PCS)(metal)
Save up to 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (20mm). Threaded on both ends for a M2 screw.What's included4x aluminum 20mm standoff...
View full details
Sold out
1x Adjustable 4 In 1 Multi Tool - Hex
Sold out
Helps Removes Props.
Save 0%
Save %
Product Description About Cube Orange+ An integrated and single board/box all-in-one flight controller Provide sufficient interfaces...
View full details
Save 0%
Save %
Specification:Item Name: 5V Active Alarm Buzzer Beeper TrackerWorking Voltage: 5VQuantity: 5 pcsDimension: 6Pcs 9x5.5mm and 6Pcs 12x9.5mmWeight: 0....
View full details
Save up to 27%
Save %
SPECIFICATION Propeller Diameter: 13inch Pitch: 12 Blades 3 Material: Carbon Reinforced Nylon Weight: 23.3g Hub Diameter: 22mm Hub Thickness: 12mm...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-ILS Quantity: 1Pc Length: approx. 1...
View full details
Sold out
1x SMA to MMCX adapter
Sold out
The Archer SR8 PRO are gyro-stabilized receivers with a built-in 3-axis gyroscope and 3-axis accelerometer, they have 8 high-precision PWM channel...
View full details
Save 0%
Save %
This is a set of 4 aluminum standoffs, with a textured finish (25mm). Threaded on both ends for a M2 screw.What's included4x aluminum 25mm standoff...
View full details
Sold out
The Gemfan D63 3-blade props are specially designed for the pusher style drone-like Beta95X V3 Whoop Quadcopter and Beta95X V3 HD Digital VTX. It ...
View full details
Save 0%
Save %
FrSKYs S.Port Tool Kit or STK enables configuration of your FrSKY S.Port receiver. The STK has two connecting ports, S.Port 1 (upper) Monitors, re...
View full details
Sold out
The FrSky S6R 6ch Receiver w/ 3-Axis Stabilisation and Smart Port. Features a built in 3-axis gyro and 3-axis accelerometer sensor for fixed wing. ...
View full details
Save 0%
Save %
It's a internal-heated heating core specially for TS100, tip and heater as a whole. Specifications Type: TS-C1 Quantity: 1Pc Length: approx. 10...
View full details
Save 0%
Save %
2 x CW 2 x CCW 1mm hole Brushless Micro prop30mm diameter
Sold out
The Lumenier Digital RBG Arm LED board is a universal addressible array of RBG LEDs. The board has 4 super bright RBG LEDs installed that can work ...
View full details
Sold out
Description Small size but big power! The iFlight BLITZ Micro Force is the VTX you need for your next Micro build. Small enough to fit into smalle...
View full details
Save 0%
Save %
Features: - Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9, Insta360, etc.)- Stable power supply from any LiPo ...
View full details
Sold out
With this board you can enable connectivities with your servos via 6ch PWM.SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)
Save 0%
Save %
2.4g receiver antenna with IPEX 4 Generation connector 5.9 inch (150mm) - Length, RF113 Silver plated Wire Material Precision machining,Low loss ...
View full details