support@flyingrobot.co.za
support@flyingrobot.co.za
Save 0%
Save %
Descriptions. This cable conects betweeen any PL-xxx sensor to the Hub X2-V2, or any BEC from from the PL and PC Series.
Save 0%
Save %
Save 0%
Save %
Larger Pitot Tube Screw mounting with tube Specifications Pitot Tube M3x10 screws 1m Tube
Save 0%
Save %
PREORDERS OPEN NOW - Stock arriving 23 April 2019 Set of four arms for the Micro Alien Frame Can use up to a 3" prop with these arms.
Save 6%
Save %
These Micro GPS uses multi-constellation GNSS powered by u-blox M10, a concurrent GNSS receiver which can receive and track multiple GNSS systems. ...
View full details
Save 0%
Save %
Mini Carrier Board has the standardized DF17 connector which allows user to connect it to every version of the Cube flight controller. With smaller...
View full details
Save 0%
Save %
Save 0%
Save %
Video cable for DJI O3 air unit.
Save 0%
Save %
MMCX 90 Deg male to MMCX Straight Male 8cm lead
Save 0%
Save %
Save up to 0%
Save %
MMCX to SMA Female Extension cable, various lengths available High temperature and acid corrosion resistant, high-frequency low-loss antenna extens...
View full details785-1000-1-ND MFG : Alpha & Omega Semiconductor Inc. (VA) / AO3400A DESC: MOSFET N-CH 30V 5.7A SOT23-3L 5.00600 50.06 COO : CHINA ECCN: EAR99 H...
View full details
Save 0%
Save %
Features: Motor wire protectors to prevent from prop strikes. There are different lengths for our iFlight BNFs: 65mm: F5D and F6D rear Arms Chim...
View full details
Save 0%
Save %
Specification Weight: 9.5g/pair Type:JX-9 Metal Material: Brass Gold Plated Plastic Material: PA Instantaneous current: (big) 60A/(Small) 7A Rated ...
View full details
Save 0%
Save %
Brand: Amass (Original Manufacturer) Body Material and Surface Plating: Brass and gold plated Insulation Material: PA66 Original Internal Resista...
View full details
Save 0%
Save %
Rated voltage: DC500V Rated current: 30A Peak current: 60A Contact Resistance: 0.50mΩ Metal material: Brass, gold plated Plastic material: PA...
View full details
Save 0%
Save %
Connector Type: 3 pin 3.5mm bullet plug. Weight: 9.6g per pair (including sleeves).
Save 0%
Save %
Save 0%
Save %
Details A set of 2 HQ propellers, 2 blade style with a 6mm center hub. They come with a set of plastic reducers (3,4,5,6 mm). They come in sets ...
View full details
Save 0%
Save %
This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side scre...
View full details
Save 0%
Save %
The frame features a traditional look and geometry to maintain the flight characteristics familiar to users, ensuring easy compatibility with the B...
View full details8 x 5mm black nylon hex M3 standoffs