SkyRC D100 Dual Charger
SKYRC D100 is a twin-channel charger with two independent circuits which can charge two different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrades. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
Internal Resistance Meter
The charger can check battery's total internal resistance and each cell's internal resistance.
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
With Charge Master software you can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".
Built in Power Supply = 1x100watts shared between the two channels.
Using an external 12v Power Supply = 2x100watts. So 100watts per channel.
Dual Power Input
AC input 100-240V or DC input 11-18V
Dual Independent Charging Circuit for A and B side
Charge two different batteries at the same time, with different power output
SKYRC B6 AC+ V2 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting.
Check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger.
Cell Resistance Display
Check battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance.
Automatic Charging Current Limit / Capacity Limit / Temperature Threshold / Processing Time Limit
Adjustable Terminate Voltage
The charger allows user to set the charge/ discharge end voltage.
The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in real time graphs, and can also control charging and update firmware from "Charge Master".
- Dimension : 163mm (w) x 153mm (l) x 72mm (h)
- Weight : 975g
- DC Input Voltage : 11~18V
- Charge Circuit Power : DC Input 2 x 100W / AC Input 100W (Support Power Distribution)
- Charge Current : Max. 0.1-10A
- Discharge Circuit Power : 2 x 10W
- Current Drian for Balancing Port : Max 200mA/cell
- Trickle Charging Current : 30mA-300mA & OFF
- LiPo/LiFe/Lilon/LiHV Battery Cell Count : 1S~6S
- NiMH/NiCd Battery Cell Count : 1-15S
- Pb Battery : 2-20V
1 x SKYRC D100 AC/DC Dual Balance Charger and Discharger with EU AC cable
2 x Balance Board
2 x XT60 Charging Leads
2 x Open end Charging Leads