Description
SimpleBGC 32-bit Extended controller is the advanced version of SimpleBGC 32-bit brushless gimbal controller introduces new capabilities:
- Built-in Frame IMU
- Current sensor to mesure battery power consumption
- CAN-bus to replace I2C for the IMU sensor and other periphery connection
- Dedicated 3x SPI/PWM ports for encoder connection
- Additional I2C port to connect 2nd IMU or encoders
- Built-in sound beeper
- Up to 6s LiPo battery is supported
Specifications
| Size of the board | 50×50 mm |
| Distance between the mounting holes | 45 mm |
| Diameter of the mounting holes | 3 mm |
| Power supply voltage | 8-26 V (3s-6s LiPo) |
| Maximum motor current | 1,5 A |
| 5V output current to power external devices | up to 1 A |
| 3V output current | 150 mA |
The kit includes:
- SimpleBGC 32bit extended main bord – 1 pc
- Motor 30 cm wires – 3 pcs
- Battery 20 cm wire – 1 pc
- Ferrite coils 10-15 mm diameter, 3-5 mm thickness – 3 pcs
- Encoder 10 cm wires – 3 pcs
- IMU sensor board – 1 pc
- IMU 50 cm wire – 1 pc
- Encoder-enabled firmware
CAN_Driver Kit includes three driver boards.
* Second I2C IMU is integrated in the board.