Matek F722 WPX

  • Sale
  • Regular price R 1,315.00
  • Will be in stock after

Add to Wishlist

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: DPS310 (I2C)
  • OSD: Pixel OSD/FrskyOSD (Uart6)
  • Blackbox: MicroSD socket (SPI)
  • 6x UARTs(5 Spare) with built-in inversion
  • 1x Softserial_Tx option
  • 10x PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
  • 1x SH1.0_6pin connector for external USB and buzzer
  • Dual Camera Inputs switcher
  • Vbat filtered power ON/OFF switcher
  • PWM camera menu control: Not supported by INAV
  • DJI FPV air unit: any spare UART

Power

  • 6~30V DC IN (2~6S LiPo)
  • 132A high-precision Current Sense (Scale 250)
  • PDB/Current sense resistor: 60A continuous, 132A burst.
  • BEC 5V 2A for FC & Peripherals
  • BEC Vx 5A for servos, 5V/ 6V option
  • Vbat filtered output 1A for VTx and Camera
  • LDO 3.3V 200mA
  • Battery Voltage Sensor: 1:10 (Scale 1100)

FC Firmware

  • INAV target: MATEKF722WPX

Physical

  • Dimensions: 44 x 29 x 10 mm
  • Mounting: 25 x 25mm, Φ2mm
  • Weight: 20g w/ bottom plate and USB/buzzer adapter

Including

  • 1x FC F722-WPX
  • 1x USB(Type-C)/Buzzer (Active) Adapter
  • 1x Bottom plate, 44 x 29mm
  • 2x JST-SH-6P to JST-SH-6P cables, 20cm
  • 5x Brass standoffs, M2*4mm
  • 10x screws, M2*3.5mm
  • Dupont 2.54 pins  (Board is shipped unsoldered)


Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)