BLHELI32 / F3 MCU/4x 45A
The New BLHELI32 ESC adapted the F3 MCU, which will provide a smoother control and faster response speed. 4x 45A F3 BLHELI32 ESC in 20x20 standard .
The latest Tekko32 F3 4in1 mini ESC has got some improvements on its performance：
The PCB design uses a design in which the drive circuit and the control circuit are separated. This design broadens the overcurrent capability of the drive circuit, and at the same time reduces the electrical interference to the control circuit.
F3 MCU, double the speed of F051
32bit ESC with BLHELI32 firmware
Supports 3-6S lipo input
Default PWM output 96K
Amperage meter scale ratio has been adjusted to 185.
PWM input, TLM supported
Voltage output (VBAT)
NO output BEC
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Ext. cap needed for 6s (1000uf 35v for 6s usage.)
Mounting holes: 20x20mm(M3)
Size:32 x 38 mm
This motor idle throttle value can be adjusted in Betaflight configuration, under ESC/Motor Features.Tekko32 F3 4in1 45A mini ESC *1
When using dshot, the motor idle throttle value is recommended to be adjusted to “10” percent.
M2 Anti-Vibration Silicone Grommet Insert *4
Electrolytic capacito: 1000uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1