{"title":"FPV VTX","description":"","products":[{"product_id":"tbs-unify-pro-5g8-hv","title":"TBS Unify Pro 5G8 HV - SMA","description":"\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eUpgraded UFL connector\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe most popular, most powerful video transmitter on the market just got a \"bigger\" brother. It can be connected directly to up to 6S of battery-juice and do 5V output for your camera. It will filter the power and make sure you get clean video, even without being connected to a TBS CORE or TBS PowerCube. With a brand new active output power monitor, we ensure that you'll always meet the race requirements, while giving you the best possible picture. \u003c\/p\u003e\n\u003cp\u003eWith only 7g and a 31x22x6mm form factor, your quad will barely notice it's there. The 25mW - 800mW adjustable output power allows you to race with friends and penetrate serious concrete with just a few pushes of a button. The 40CH coverage gives you the freedom to fly at any race without having to resort to video transmitter swapping practices (*).\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3\u003ePITMODE - MADE TO RACE\u003c\/h3\u003e\n\u003cp\u003eZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. \u003c\/p\u003e\n\u003ch3\u003eSMARTAUDIO - FULL CONTROL\u003c\/h3\u003e\n\u003cp\u003eSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-\/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!\u003c\/p\u003e\n\u003ch3\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h3\u003e\n\u003cp\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\n\u003ch3\u003eSAY NO! TO DIPSWITCHES\u003c\/h3\u003e\n\u003cp\u003eEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. \u003c\/p\u003e\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 2S - 6S\u003c\/li\u003e\n\u003cli\u003eSupply current: up to 600mA\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eAudio carrier Frequency: 6.5 MHz\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 5g (with SMA, without antenna)\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: SMA Female Socket with screw mounting holes\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eINCLUDED\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTBS UNIFY PRO 5G8 HV Video transmitter\u003c\/li\u003e\n\u003cli\u003eVideo Transmitter \/ Camera \/ Power cable\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.team-blacksheep.com\/tbs-unify-pro-5g8-manual.pdf\"\u003eTBS UNIFY Pro Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003c\/h2\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":21181120900,"sku":"TBS014","price":979.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/DSC01110111-ga_41b1d192-aa19-4277-a0e0-cfbb124a5c11.jpg?v=1639134652"},{"product_id":"tbs-unify-pro-5g8-sma-u-fl-pigtail","title":"TBS UNIFY PRO 5G8 SMA (U.FL) Pigtail","description":"\u003cspan\u003eA spare SMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.\u003c\/span\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":22020357188,"sku":"TBS016","price":99.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/5ac74de81f75858af0137b65a07a19b815b4d2a3_41b6c64d-32dd-4899-b1f0-5d7b4d431da7.jpg?v=1639134640"},{"product_id":"tbs-unify-pro-5g8-linear-antenna-5-8-ghz","title":"TBS UNIFY PRO 5G8 Linear Antenna (5.8 GHz)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eA linear antenna with IPX \/ U.FL connector compatible with  the TBS UNIFY PRO 5G8 HV or U.FL connector compatible Video transmitters. In conjunction with the UNIFY PRO the entire package weighs a tiny 3g for VTX including antenna. A must for anyone looking to shed some weight. Suggested only for racing under ideal video conditions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eWeight: 0.9 grams\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLength: approximately 60mm (include shrink tube)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWidth: 1.79mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":30751601860,"sku":"TBS017","price":119.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/9bcfed3b96f29a88111d7151db758e16b7e8d7eb_ce4978ac-a53a-4162-9a8f-91ca68922369.jpg?v=1639134646"},{"product_id":"tbs-unify-pro-5g8-rp-sma-pigtail-u-fl","title":"TBS UNIFY PRO 5G8 RP-SMA Pigtail (U.FL)","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA spare RPSMA pigtail for the TBS Unify PRO 5G8 and TBS Unify PRO 5G8 HV. U.FL connector that allows snap-on installation.\u003c\/span\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":30751602052,"sku":"TBS018","price":99.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/0b2277dacc8ecc6d852451847ba11a6197528c87_aaf7563a-b339-4826-ab85-fa83513eca94.jpg?v=1639134643"},{"product_id":"tbs-unify-pro-5g8-hv-vtx-pigtail","title":"TBS UNIFY PRO 5G8 HV VTx Pigtail","description":"Standard pigtail that comes with each TBS UNIFY PRO 5G8 HV.","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":36311520196,"sku":"TBS030","price":41.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/952e373f451f6f6bbcf306421db23eda1056c687_d40b1018-4d97-4988-9c40-0d735e8c5b84.jpg?v=1639134649"},{"product_id":"foxeer-tm25-switcher-cable","title":"Foxeer TM25 Switcher Cable","description":"Foxeer TM25 Switcher breakout Cable","brand":"Foxeer","offers":[{"title":"Default Title","offer_id":38975453380,"sku":"FPV052","price":18.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/20170418_125625.jpg?v=1571275611"},{"product_id":"dys-elf-micro-vtx","title":"DYS ELF Micro VTX","description":"\u003cmeta charset=\"utf-8\"\u003e5.8GHz, 40CH, 25mW","brand":"DYS","offers":[{"title":"Default Title","offer_id":39811654596,"sku":"DYS083","price":454.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/20170504_105336.jpg?v=1571275615"},{"product_id":"unify-pro-mounting-board-5v-version","title":"Unify Pro and Rx mounting board - 5V and HV\/Race versions","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis board allows a TBS Unify Pro (5V or HV\/Race) and receiver to be mounted in a stack for a low profile and clean solution. The pads let you to solder your Unify to the mounting board. You can either use the plug that comes with the Unify or directly solder the wires to the pads.\u003c\/p\u003e\n\u003cp\u003eThere is the option to easily solder a FrSky D4R, X4R, or XM+ receiver, but you are not limited to only those receivers. Spektrum, Futaba, FlySky, or any other receivers are also compatible. Simply connect the Rx directly to the flight controller (ignore the receiver portion on the board) or connect the Rx to one of the header pins on the Unify Mounting Board and use the pads located on the side as intended. The solder bridge pads will still have to be used to select which headers you will be using.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/M7R6R7TpG-E\" frameborder=\"0\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Whitenoise","offers":[{"title":"HV\/RACE","offer_id":42104479684,"sku":"WTN001","price":69.0,"currency_code":"ZAR","in_stock":false},{"title":"HV V3","offer_id":15845991972954,"sku":"WTN003","price":69.0,"currency_code":"ZAR","in_stock":false},{"title":"5V","offer_id":16367919824986,"sku":"WTN002","price":69.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/HV1.jpg?v=1571275623"},{"product_id":"tbs-vtx-4-pin-cable-tbs-cam-vtx-cables","title":"TBS VTx 4-pin Cable (TBS CAM \/ VTX CABLES)","description":"\u003cp\u003eStandard TBS Video transmitter cable used in all TBS 2.4GHz and 5.8GHz systems. Provides 5V to the TBS Video transmitters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*compatible with TBS UNIFY PRO 5G8 V2\/V3\u003c\/p\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":51678403140,"sku":"TBS054","price":65.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/vtx-replacement-cable.jpg?v=1639134516"},{"product_id":"tbs-unify-pro-5g8-hv-race-mmcx","title":"TBS Unify Pro 5G8 HV - Race (MMCX)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv id=\"product_text\"\u003e\n\u003cp\u003eDistilling the smallest, lightest and most powerful video transmitters (aka \"the golden standard\" :) ) down to a bare minimum for FPV racing, at a very attractive price!\u003c\/p\u003e\n\u003ch1\u003eMAIN FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSmallest, lightest video transmitter on the market\u003c\/li\u003e\n\u003cli\u003e2-6S input power supported\u003c\/li\u003e\n\u003cli\u003e25mW \/ 200mW power settings\u003c\/li\u003e\n\u003cli\u003eUltra-clean transmission (up to 16 pilots at once!)\u003c\/li\u003e\n\u003cli\u003ePitMode - power up your quad during a race\u003c\/li\u003e\n\u003cli\u003eEasy OSD, FC and RC channel changes, with fallback button menu\u003c\/li\u003e\n\u003cli\u003eRobust RF amplifier allows powering up without antenna for hours!\u003c\/li\u003e\n\u003cli\u003eClean powerup and video switching\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003ePITMODE - MADE TO RACE\u003c\/h1\u003e\n\u003cp\u003eZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. \u003c\/p\u003e\n\u003ch1\u003eSMARTAUDIO V2 - FULL CONTROL\u003c\/h1\u003e\n\u003cp\u003eSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-\/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!\u003c\/p\u003e\n\u003ch1\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h1\u003e\n\u003cp\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\n\u003ch1\u003eSAY NO! TO DIPSWITCHES\u003c\/h1\u003e\n\u003cp\u003eEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. \u003c\/p\u003e\n\u003ch1\u003eSPECIFICATIONS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 2S - 6S\u003c\/li\u003e\n\u003cli\u003eSupply current: 600mA\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eAudio carrier Frequency: 6.5 MHz\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.4g (PCB Only)\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 13dBm (25mW), 23dBm (200mW)\u003c\/li\u003e\n\u003cli\u003eSize: 31 x 23 x 5 (mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eINCLUDED\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTBS UNIFY 5G8 Video transmitter (MMCX)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.team-blacksheep.com\/tbs-unify-pro-5g8-manual.pdf\"\u003eTBS UNIFY Pro Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.team-blacksheep.com\/tbs_smartaudio_rev08.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTBS SmartAudio specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.\u003c\/p\u003e\n\u003cp\u003e**PS all channels marked in black are locked and only accessible via \u003cspan\u003eCore PNP Pro or FPVision\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ca name=\"customize\"\u003e\u003c\/a\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":8167143080037,"sku":"TBS090","price":429.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/TBS-Unify-pro-MMCX_b4eea863-a96d-4abd-9bf0-0404dbeb57e4.jpg?v=1639134813"},{"product_id":"tbs-unify-pro-5g8-hv-7-pin-vtx-pigtail","title":"TBS UNIFY PRO 5G8 HV 7-Pin Vtx Pigtail","description":"TBS UNIFY PRO 5G8 HV 7-PIN VTX PIGTAIL.","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":12457590292581,"sku":"TBS124","price":59.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/TBS_Unify_Pro_HV_7pin_Pigtail_43d60f92-40e7-47ff-8429-ca37a2c0e210.png?v=1639134651"},{"product_id":"tbs-unify-pro-5g8-hv-race-2-mmcx","title":"TBS Unify Pro 5G8 HV - Race 2 (MMCX)","description":"\u003c!--StartFragment--\u003e\n\u003cp style=\"text-align: left;\"\u003eA compilation of all the best practices and lessons learned. The smallest, most robust and full-featured video transmitter from TBS in a RACE format. The engineering team at TBS has spent months analyzing all the feedback and successes from the TBS UNIFY PRO video transmitters and has completely redesigned the final revision in the TBS UNIFY PRO line.\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eMAIN FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSmallest, lightest video transmitter on the market\u003c\/li\u003e\n\u003cli\u003e2-6S input power supported\u003c\/li\u003e\n\u003cli\u003e25mW \/ 100mW \/ 400mW power settings\u003c\/li\u003e\n\u003cli\u003eIntegrated heat sink\u003c\/li\u003e\n\u003cli\u003eUltra-clean transmission (up to 16 pilots at once!)\u003c\/li\u003e\n\u003cli\u003ePitMode - power up your quad during a race\u003c\/li\u003e\n\u003cli\u003eEasy OSD, FC and RC channel changes, with fallback button menu\u003c\/li\u003e\n\u003cli\u003eRobust RF amplifier allows powering up without antenna for hours!\u003c\/li\u003e\n\u003cli\u003eClean powerup and video switching\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: left;\"\u003eSMALL \u0026amp; ROBUST\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eBy completely redesigning the circuitry and changing key components we managed to set a new standard in size and weight for a 6S capable HV video transmitter, without impacting usability. The new heat sink made from patented polymer materials improves heat resistance while also protecting components from impacts. Pilots will be blown away by the clean output power, robustness and ease of mounting. In a nutshell, it's the perfect video transmitter for any serious drone racer.\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eSMARTAUDIO V2.1 - TEAM RACE READY\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eThe industry standard SmartAudio technology has been revamped slightly in this final iteration. The power levels have been rearranged to make more sense, doubling range with each setting: 25mW \/ 100mW* \/ 400mW*. Additionally, PitMode functionality has been opened up to in-race operation, which makes it possible to all but disable output power through Smart Audio, thus making team races or powered up quads on standby a possibility.\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eSPECIFICATIONS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 2S - 6S\u003c\/li\u003e\n\u003cli\u003eSupply current: 600mA\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eAudio carrier Frequency: 6.5 MHz\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.2g\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 13dBm (25mW), 20dBm (100mW), 26dBm (400mW)\u003c\/li\u003e\n\u003cli\u003eSize: 27 x 20 x 4 (mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: left;\"\u003eINCLUDED\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eTBS UNIFY 5G8 Video transmitter (MMCX)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro-5g8-manual.pdf\"\u003eTBS UNIFY Pro Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs_smartaudio_rev08.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTBS SmartAudio 2.1 specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003e* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.\u003c\/p\u003e\n\u003c!--EndFragment--\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":15906867183706,"sku":"TBS149","price":635.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/pPs9Uv39Ql6FJOMq0WPf_DSC01563-ga_7c583ee3-d4da-467e-931a-edbc18cc7635.jpg?v=1639134772"},{"product_id":"tbs-unify-pro32-nano-5g8","title":"TBS Unify Pro32 Nano 5G8 V1.1","description":"\u003c!--StartFragment--\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003c\/p\u003e\u003cp style=\"text-align: left;\"\u003eWith the TBS UNIFY PRO32 Nano we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best nano VTx ever made.\u003c\/p\u003e\u003ch1 style=\"text-align: left;\"\u003eMAIN FEATURES\u003c\/h1\u003e\u003cul\u003e\n\u003cli\u003eSmallest, lightest video transmitter on the market\u003c\/li\u003e\n\u003cli\u003eBarcodes reading\u003c\/li\u003e\n\u003cli\u003eUp to \u003cstrong\u003e500mw+ \u003c\/strong\u003eof output power\u003c\/li\u003e\n\u003cli\u003eUltra-clean transmission (up to 16 pilots at once!)\u003c\/li\u003e\n\u003cli\u003ePitMode - power up your quad during a race. Now with team-race capability!\u003c\/li\u003e\n\u003cli\u003eEasy OSD, FC and RC channel changes, with fallback button menu\u003c\/li\u003e\n\u003cli\u003eRobust RF amplifier allows powering up without antenna for hours!\u003c\/li\u003e\n\u003cli\u003eClean powerup and video switching\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch1 style=\"text-align: left;\"\u003eBARCODES? BARCODES!! (PATENT PENDING)\u003c\/h1\u003e\u003cp style=\"text-align: left;\"\u003eThe VTx is capable of processing the camera image. So we taught it to read barcodes! This means the VTx no longer needs to be transmitting to set channels, and setting channels can be done in the pits. It also means no more guesswork what channel the VTx is on, simply point it at the barcode of your choice and it will move to that channel or power level! There are many more exciting features coming with this technology, stay tuned and barcode on!\u003c\/p\u003e\u003ch1 style=\"text-align: left;\"\u003ePITMODE - MADE TO RACE\u003c\/h1\u003e\u003cp style=\"text-align: left;\"\u003eZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!\u003c\/p\u003e\u003ch1 style=\"text-align: left;\"\u003eSMARTAUDIO V2.1 \u0026amp; CRSF - TEAM RACE READY\u003c\/h1\u003e\u003cp style=\"text-align: left;\"\u003eSmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).\u003c\/p\u003e\u003cp style=\"text-align: left;\"\u003eWith all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-\/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!\u003c\/p\u003e\u003ch1 style=\"text-align: left;\"\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h1\u003e\u003cp style=\"text-align: left;\"\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\u003ch1 style=\"text-align: left;\"\u003eSPECIFICATIONS\u003c\/h1\u003e\u003cul\u003e\n\u003cli\u003eOperating Voltage: 3-13V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 1g\u003c\/li\u003e\n\u003cli\u003eDimensions: 15 x 13 x 2mm\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: u.FL socket\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 28dBm (500+mw)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch1 style=\"text-align: left;\"\u003eINCLUDED\u003c\/h1\u003e\u003cul\u003e\n\u003cli\u003e1x TBS UNIFY PRO32 5G8 Video transmitter\u003c\/li\u003e\n\u003cli\u003e1x Silicone cable set (pre-tinned)\u003c\/li\u003e\n\u003cli\u003e1x Linear whip antenna\u003c\/li\u003e\n\u003cli\u003e1x Shrink Tube\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch1 style=\"text-align: left;\"\u003eDOWNLOADS\u003c\/h1\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro32-manual.pdf\" target=\"_blank\"\u003eTBS UNIFY Pro32 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro32-manual-de.pdf\" target=\"_blank\"\u003eTBS UNIFY Pro32 Manual (German)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/doc_ce\/id:2604\" target=\"_blank\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp style=\"text-align: left;\"\u003e\u003c\/p\u003e\n\u003c!--EndFragment--\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":16053601992794,"sku":"TBS155","price":599.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/DSC01594-ga_fdbf03ec-a8ec-458e-ad59-941d364b67f0.jpg?v=1639134534"},{"product_id":"tbs-unify-pro32-hv-mmcx","title":"TBS Unify Pro32 HV (MMCX)","description":"\u003cp style=\"text-align: left;\"\u003eWith the TBS UNIFY PRO32 HV (MMCX) we have boosted the output power, improved the robustness, decreased the power consumption, added capability for insane features and perfected the way it is installed in your multirotor. In a nutshell, it’s the most comprehensive, future proof, highest quality and overall best HV VTx ever made.\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eMAIN FEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eDouble-decker design for insane cooling and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000mW or more \u003c\/strong\u003eoutput power\u003c\/li\u003e\n\u003cli\u003eUltra-clean transmission (up to 16 pilots at once!)\u003c\/li\u003e\n\u003cli\u003ePitMode - power up your quad during a race. Now with team-race capability!\u003c\/li\u003e\n\u003cli\u003eEasy OSD, FC and RC channel changes, with fallback button menu\u003c\/li\u003e\n\u003cli\u003eRobust RF amplifier allows powering up without antenna for hours!\u003c\/li\u003e\n\u003cli\u003eClean powerup and video switching\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003cli\u003eBuilt-in Mic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: left;\"\u003ePITMODE - MADE TO RACE\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's) to allow you to power up your quad and still see the image! You've got less than one meter of range to put your quad through its paces before placing it on that starting grid. Using SmartAudio or CRSF, you can power up the VTx using your remote!\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eSMARTAUDIO V2.1 \u0026amp; CRSF - TEAM RACE READY\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eSmartAudio technology provides UART control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. Betaflight OSD, TBS CORE PRO).\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eWith all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-\/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h1\u003e\n\u003cp style=\"text-align: left;\"\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\n\u003ch1 style=\"text-align: left;\"\u003eSPECIFICATIONS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 6V - 25V (2 - 6S)\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.7g\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 25 x 5.8mm\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: MMCX\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW), 30dBm+ (1000mW+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: left;\"\u003eINCLUDED\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS UNIFY PRO32 5G8 HV Video transmitter\u003c\/li\u003e\n\u003cli\u003e1x Silicone cable (ends pre-tinned)\u003c\/li\u003e\n\u003cli\u003e1x MMCX to SMA pigtail\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1 style=\"text-align: left;\"\u003eDOWNLOADS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro32-manual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTBS UNIFY Pro32 Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro32-manual-de.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTBS UNIFY Pro32 Manual (German)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/doc_ce\/id:3427\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":17358729248858,"sku":"TBS184","price":1349.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/Y4ChKHNiTQm6KIvsh4SR_TBS-Unify-PRO32-VTX-HV-MMCX-1_b5c115d3-2f34-4ddf-a32f-1a91d3ddaaca.jpg?v=1698146284"},{"product_id":"herelink-hd-video-transmission-system","title":"Herelink HD Video Transmission System v1.1","description":"\u003c!--StartFragment--\u003e\n\u003cdiv class=\"fusion-text\" style=\"text-align: start;\"\u003e\n\u003ch2\u003eHerelink HD Video\/Control\/Telemetry Transmission System\u003cbr\u003e\n\u003c\/h2\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eICASA Approved\u003c\/li\u003e\n\u003cli\u003eTested and demonstrated BVLOS to SACAA for 15KM \u003c\/li\u003e\n\u003cli\u003eSupports dual HDMI 1080P 60fps video input, which can be modified through the QGC interface.\u003c\/li\u003e\n\u003cli\u003eDual S.bus signal output for simultaneous control of autopilot and pan\/tilt cameras.\u003c\/li\u003e\n\u003cli\u003eThe integrated digital transmission and image transmission can simultaneously transmit the flight data of the autopilot and the image output by the camera to the remote controller.\u003c\/li\u003e\n\u003cli\u003eBuilt-in QGC open source ground station with adaptable apm and px4 firmware for direct flight function.\u003c\/li\u003e\n\u003cli\u003eIndependent Mavlink commands camera buttons and scroll wheel channels.\u003c\/li\u003e\n\u003cli\u003eCustom channel button and PWM value assignment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHardware Parameter\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAir Unit and Controller hardware information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProcessor: SoC – Pinecone S1 AP: 4 x large core, Cortex A53, 2.2GHz 4 x small core, Cortex A53, 1.4GHz GPU: 4 core, Mali-\u003c\/li\u003e\n\u003cli\u003eT860 SDR: A7 + DSP Storage: Sky: LPDDR3: 1GB Ground: LPDDR3: 2GB Sky \/ Ground: EMMC: 4GB\u003c\/li\u003e\n\u003cli\u003eTransmission Distance: FCC 20km CE \/ SRRC 12km Image transmission delay: ≤ 110ms Image transmission: 720p@30fps 1080p@30 \/ 60fps transmission\u003c\/li\u003e\n\u003cli\u003eFrequency Band: 2.4GHz ISM Receive sensitivity: -99dBm@20MHz BW Interference recovery: \u0026lt; 1s\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAir Unit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAppearance: core board + video daughter board + structure of RF daughter board\u003c\/li\u003e\n\u003cli\u003eAmong them, the video daughter board completes the input bridge function of theHDMI signal.\u003c\/li\u003e\n\u003cli\u003eThe RF daughter board completes the function of transmitting and receiving signals\u003c\/li\u003e\n\u003cli\u003eM2 (E) connector connection between daughter board and core\u003c\/li\u003e\n\u003cli\u003eSize: 78.5x30x13mm\u003c\/li\u003e\n\u003cli\u003eMicro HDMI x 2: Input for external camera video signals\u003c\/li\u003e\n\u003cli\u003e2 Pin interface x 1:5V-12V power input interface\u003c\/li\u003e\n\u003cli\u003e3 Pin interface x 1:3.3V \/ 5V level UART interface\u003c\/li\u003e\n\u003cli\u003e4 Pin interface x 1 : Two 3.3V level RC output connectors (S.bus in phase, S.bus inverting or PPM signal output, ground terminal control)\u003c\/li\u003e\n\u003cli\u003eMicro USB x 1: for debugging upgrades, support OTG mode\u003c\/li\u003e\n\u003cli\u003eKeyhole x 1: for frequency and status reset\u003c\/li\u003e\n\u003cli\u003eIndicator x 2: used to indicate the frequency and picture status\u003c\/li\u003e\n\u003cli\u003eMMCX antenna jack x 2: used for signal transmission and ground communication\u003c\/li\u003e\n\u003cli\u003eSignal bandwidth: 20MHz \/ 10MHz\u003c\/li\u003e\n\u003cli\u003ePower consumption: the average power consumption of the single-sided module is less than 4W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eController:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHousing: plastic\u003c\/li\u003e\n\u003cli\u003eDimensions: 217 × 106.5 × 31mm (the whole machine does not contain external antenna and rocker)\u003c\/li\u003e\n\u003cli\u003eScreen: 5.46 inch, 1080P, 16 million colors, capacitive touch screen\u003c\/li\u003e\n\u003cli\u003eAudio: Built-in speaker × 1, built-in microphone × 2\u003c\/li\u003e\n\u003cli\u003eRemote control: rocker × 2, scroll wheel × 1, bottom button × 6, with backlight, top button × 1 (right)\u003c\/li\u003e\n\u003cli\u003eCommunication : BT \/ WIFI \/ GPS 2.4G map transmission ground\u003c\/li\u003e\n\u003cli\u003eIndicator light: Top tri-color lamp × 2 (left, right)\u003c\/li\u003e\n\u003cli\u003eInterface: MicroUSB×1, TFlash×1 (supports maximum 64G expansion)\u003c\/li\u003e\n\u003cli\u003eAntenna: Orientation (5dBi) × 1 detachable, omnidirectional (2dBi) × 1 detachable\u003c\/li\u003e\n\u003cli\u003eBuilt-in wifi antenna, built-in GPS antenna, external GPS antenna interface\u003c\/li\u003e\n\u003cli\u003ePower : Built-in 4950 mAh Lipo Battery\u003c\/li\u003e\n\u003cli\u003eCharging : Support micro USB port 5v 2A current charging\u003c\/li\u003e\n\u003cli\u003ePower consumption: The average power consumption does not exceed 4W (only picture transmission work, medium screen brightness, WiFi off, GPS off)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"CubePilot","offers":[{"title":"Default Title","offer_id":30718631903322,"sku":"PIX036","price":31999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/files\/PIX036-Backorder-Herelink-HD-Video-Transmission-System-v1.1.jpg?v=1750423991"},{"product_id":"tbs-unify-pro-nano-5g8","title":"TBS UNIFY PRO NANO 5G8","description":"\u003c!--StartFragment--\u003e\u003ch3 class=\"h1\" style=\"text-align: left;\"\u003eSIZE MATTERS!\u003c\/h3\u003e\u003cp style=\"text-align: left;\"\u003eAs builds become smaller and the innovation surrounding brushed and brushless micro quads accelerates, the need for a high-quality VTx increases. TBS has built the smallest VTx possible, focusing purely on size! Sporting the usual Unify Pro pedigree, a newly-revised u.FL connector and the industry-standard Smart Audio support. You will be blown away with the performance in terms of range, signal clarity and signal spacing.\u003c\/p\u003e\u003ch3 class=\"h1\" style=\"text-align: left;\"\u003eSPECIFICATIONS\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Voltage:\u003c\/strong\u003e 4.5V - 5V ONLY\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower levels:\u003c\/strong\u003e 25mW \/ 50mW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface: \u003c\/strong\u003eSmartAudio and capacitive button (or solder external tactile button separately - included!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.4g (incl. antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 13.2mm x 14.6mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna connector:\u003c\/strong\u003e u.FL (upgraded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna length:\u003c\/strong\u003e 45.6mm (end to end)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTBS Tech:\u003c\/strong\u003e Smart Audio, Clean Switch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 class=\"h1\" style=\"text-align: left;\"\u003eINCLUDES\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Unify Pro nano 5G8 VTX\u003c\/li\u003e\n\u003cli\u003e1x button switch\u003c\/li\u003e\n\u003cli\u003e1x TBS UNIFY PRO 5G8 Linear Antenna\u003c\/li\u003e\n\u003cli\u003e6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3 class=\"h1\" style=\"text-align: left;\"\u003eDOWNLOADS\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/vtx-table-for-betaflight.txt\" target=\"_blank\"\u003eVTX Table for Betaflight\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003c!--EndFragment--\u003e\n\n\u003cbr\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":39322334789782,"sku":"TBS084","price":465.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/TBS_UNIFY_PRO_NANO_5G8_1_35729904-707d-468f-bd44-20dd80edf124.jpg?v=1639134636"},{"product_id":"rfd-868x-modem","title":"RFD 868X Modem","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cdiv class=\"ProductDescriptionContainer\" itemprop=\"description\"\u003e\n\u003ch2\u003eRFD868x New Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew Processor, ARM 32 bit core.\u003c\/li\u003e\n\u003cli\u003eAir data rate: 500kbit\/s. \u003c\/li\u003e\n\u003cli\u003eAES Hardware accelerated encryption. *Fully working*\u003c\/li\u003e\n\u003cli\u003eRC PPM Passthrough with telemetry at the same time.\u003c\/li\u003e\n\u003cli\u003eFully ESD protected + filtered - Every IO port is protected and filtered.\u003c\/li\u003e\n\u003cli\u003eOriginal SiK point to point firmware implemented.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNote: Currently due to the bandwidth limitations of the 868 modems Asynchronous Mesh and Multipoint Firmware are not officially supported for the 868X modems and correct operation of this code cannot be guaranteed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLong range \u0026gt;40km depending on antennas and GCS setup *80km demonstrated by Edge Research labs on a balloon !, 57km in India, on Dipoles.\u003c\/li\u003e\n\u003cli\u003e2 x RP-SMA RF connectors, diversity switched.\u003c\/li\u003e\n\u003cli\u003e1 Watt (+30dBm) transmit power.\u003c\/li\u003e\n\u003cli\u003eTransmit low pass filter.\u003c\/li\u003e\n\u003cli\u003e\u0026gt; 20dB Low noise amplifier, high IP3.\u003c\/li\u003e\n\u003cli\u003eRX SAW filter.\u003c\/li\u003e\n\u003cli\u003eAll I\/O ESD protected and filtered.\u003c\/li\u003e\n\u003cli\u003eRe implemented SiK and Multipoint SiK firmware, field upgradeable, easy to configure.\u003c\/li\u003e\n\u003cli\u003eSmall, light weight.\u003c\/li\u003e\n\u003cli\u003eNote: Not compatible with older modems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e Interfaces:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRF : 2 x RP-SMA connectors\u003c\/li\u003e\n\u003cli\u003eSerial: Logic level TTL (+3.3v)\u003c\/li\u003e\n\u003cli\u003ePower: +5v, ~800mA max peak (at maximum transmit power)\u003c\/li\u003e\n\u003cli\u003eGPIO: 6 General purpose IO (Digital, ADC, PWM capable). \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range:  868-869 MHz\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1W (+30dBm), controllable in 1dB steps ( +\/- 1dB @=20dBm typical )\u003c\/li\u003e\n\u003cli\u003eAir Data transfer rates: 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250, 500 kbit\/sec ( User selectable, 64k default )\u003c\/li\u003e\n\u003cli\u003eUART data transfer rates: 9600, 19200, 38400, 57600, 115200, 400k, 921k baud  ( User selectable, 57600 default )\u003c\/li\u003e\n\u003cli\u003eOutput Power: 1W (+30dBm)\u003c\/li\u003e\n\u003cli\u003eReceive Sensitivity: \u0026gt;121 dBm at low data rates, high data rates (TBA)\u003c\/li\u003e\n\u003cli\u003eSize: 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) - Including RF Shield, Heatsink and connector extremeties\u003c\/li\u003e\n\u003cli\u003eWeight: 14.5g\u003c\/li\u003e\n\u003cli\u003eMounting: 3 x M2.5 screws, 3 x header pin solder points\u003c\/li\u003e\n\u003cli\u003ePower Supply: +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power\u003c\/li\u003e\n\u003cli\u003eTemp. Range: -40 to +85 deg C, tested operational from -73 to +123 deg C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"HEX","offers":[{"title":"Default Title","offer_id":40285698261142,"sku":"PIX019","price":1499.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/9qcHj7dZSqKtJUAKZrX6_RFD868x.jpg?v=1626433811"},{"product_id":"matek-video-transmitter-1-2-1-3ghz-vtx-1g3se","title":"Matek Video Transmitter 1.2\/1.3GHz, 9 Channel VTX-1G3SE-9","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e9CH INTL and 2CH US version have identical hardware and layout,  2CH is locked to 1258 \u0026amp; 1280MHz by firmware.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFeatures \u0026amp; Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9CH_INTL version (1080,1120,1160,1200,1240,1280,1320,1360,1258MHz), \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSKU: VTX-1G3SE-9\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRF power output: 0.1mw(0, pit mode), 25mw(1), 200mw(2), 800mw(3)\u003c\/li\u003e\n\u003cli\u003eCMS control via Tramp protocol variant for 1.3G\u003c\/li\u003e\n\u003cli\u003eButton control and LED indicators\u003c\/li\u003e\n\u003cli\u003eBuilt-in AGC microphone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e6-36V DC IN (2-8S LiPo)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 40mA(0.1mw), 110mA(25mw), 150mA(200mw), 250mA(800mw) @12V IN\u003c\/li\u003e\n\u003cli\u003eVideo format: NTSC or PAL\u003c\/li\u003e\n\u003cli\u003eAudio Subcarrier: 6.5 MHz \u0026amp; 6.0MHz,  onboard microphone on 6.5MHz\u003c\/li\u003e\n\u003cli\u003eRF Connector: SMA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 9g ( w\/o antanna)\u003c\/li\u003e\n\u003cli\u003eSize: board 36*21.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePads\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e+ IN-: 6-36V DC input with reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eVID: Video input\u003c\/li\u003e\n\u003cli\u003eG: Ground\u003c\/li\u003e\n\u003cli\u003e5V: onboard regulator output, Max. 1.5A load on this pad\u003c\/li\u003e\n\u003cli\u003eA6.0: Audio 6.0MHz input\u003c\/li\u003e\n\u003cli\u003eRX: CMS control via Tramp protocol\u003c\/li\u003e\n\u003cli\u003eTX \u0026amp; RX: UART for firmware update\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePacking\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1x 1.2\/1.3G Video transmitter VTX-1G3SE-9(INTL version) or VTX-1G3SE-2(US version)\u003c\/li\u003e\n\u003cli\u003e1x Dipole antenna_SMA, center freq 1240MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSettings\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePress\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebutton-A\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto select RF output levels, 0 (blue LED)= 0.1mw pitmode, 1=25mw. 2=200mw, 3=800mw\u003c\/li\u003e\n\u003cli\u003ePress and hold the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebutton-B\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor 2 seconds to enter the frequency setting. Frequency LED blinks\u003c\/li\u003e\n\u003cli\u003ePress the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebutton-B\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto select the frequency (only 1258 and 1280 can be selected on US 2CH version)\u003c\/li\u003e\n\u003cli\u003eWhen the LED blinks at new frequency, no RF output on this frequency.\u003c\/li\u003e\n\u003cli\u003eNew frequency and output will be enabled if no button action within 3 seconds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCMS control\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConnect “RX” to any spare UART-TX of flight controller,  enable “VTX(Tramp) protocol” on corresponding UART.\u003c\/li\u003e\n\u003cli\u003eCopy and paste following command into CLI of BF4.1 or later release\u003c\/li\u003e\n\u003cli\u003evtxtable bands 2\u003cbr\u003evtxtable channels 8\u003cbr\u003evtxtable band 1 1G3_A A 1080 1120 1160 1200 1240 1280 1320 1360\u003cbr\u003evtxtable band 2 1G3_B B 1080 1120 1160 1200 1258 1280 1320 1360\u003cbr\u003evtxtable powerlevels 3\u003cbr\u003evtxtable powervalues 25 200 800\u003cbr\u003evtxtable powerlabels 25 200 800\u003c\/li\u003e\n\u003cli\u003eWhen CMS control is enabled, button control will be overridden.\u003c\/li\u003e\n\u003cli\u003eonly 1258 and 1280 can be enabled via CMS control on 2CH version.\u003c\/li\u003e\n\u003cli\u003eINAV doesn’t support 1.3G CMS control via Tamp protocol for now.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Matek","offers":[{"title":"Default Title","offer_id":42293296955606,"sku":"MAT045","price":949.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/Matek_20VTX-1G3SE-2.png?v=1641291856"},{"product_id":"tbs-unify-pro-5g8-v3-sma","title":"TBS UNIFY PRO 5G8 V3 (SMA)","description":"\u003cp\u003e\u003cspan\u003eA video transmitter just for racers. 5g weight, 25 - 800mW output power (user adjustable). Cutting weight and flying far has never been this easy and affordable. Antenna Connector: SMA Female Socket\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe smallest and most powerful (800mW!) video transmitter the world has ever seen! It's race ready with PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels. It runs off a filtered 5V power supply, so it's perfect when being connected to a TBS CORE PRO or TBS PowerCube (*)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3 class=\"h1\"\u003eNEW IN V3:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eImproved Voltage spikes acceptance from 6.5Vmax. on V2 to 13Vmax. on V3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"h1\"\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmallest, lightest video transmitter on the market\u003c\/li\u003e\n\u003cli\u003eUp to 800mW of output power\u003c\/li\u003e\n\u003cli\u003eUltra-clean transmission (up to 16 pilots at once!)\u003c\/li\u003e\n\u003cli\u003ePitMode - power up your quad during a race\u003c\/li\u003e\n\u003cli\u003eEasy OSD, FC and RC channel changes, with fallback button menu\u003c\/li\u003e\n\u003cli\u003eRobust RF amplifier allows powering up without antenna for hours!\u003c\/li\u003e\n\u003cli\u003eClean powerup and video switching\u003c\/li\u003e\n\u003cli\u003eCE certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"h1\"\u003ePITMODE - MADE TO RACE\u003c\/h3\u003e\n\u003cp\u003eZero interference even while powered up, it's now a possibility! If you've ever repaired a quad during a race, you'll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW's), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You've got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels. \u003c\/p\u003e\n\u003ch3 class=\"h1\"\u003eSMARTAUDIO V2 - FULL CONTROL\u003c\/h3\u003e\n\u003cp\u003eSmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit ... jump between channels without interfering fellow pilots in air, create backup-\/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!\u003c\/p\u003e\n\u003ch3 class=\"h1\"\u003eCLEANSWITCH - NEIGHBOR FRIENDLY\u003c\/h3\u003e\n\u003cp\u003eCleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot friendly ... that's how we like it at TBS :)\u003c\/p\u003e\n\u003ch3 class=\"h1\"\u003eSAY NO! TO DIPSWITCHES\u003c\/h3\u003e\n\u003cp\u003eEven though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people's channels by mistake, or a mismatch between your goggle and video transmitter frequencies. \u003c\/p\u003e\n\u003ch3 class=\"h1\"\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 4.5 - 5.5V\u003c\/li\u003e\n\u003cli\u003eSupply current: 600mA\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: watch for normal airflow\u003c\/li\u003e\n\u003cli\u003eAudio carrier Frequency: 6.5 MHz\u003c\/li\u003e\n\u003cli\u003eVideo Input Impedance: 75 Ohm\u003c\/li\u003e\n\u003cli\u003eWeight: 5g (with SMA, without antenna)\u003c\/li\u003e\n\u003cli\u003eAntenna Connector: SMA Female Socket with screw mounting holes\u003c\/li\u003e\n\u003cli\u003eVideo Format: NTSC\/PAL\u003c\/li\u003e\n\u003cli\u003eOutput Power: 13dBm (25mW), 23dBm (200mW), 27dBm (500mW), 29dBm (800mW*)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"h1\"\u003eINCLUDED\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTBS UNIFY 5G8 Video transmitter\u003c\/li\u003e\n\u003cli\u003e5V Video Transmitter pigtail cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"h1\"\u003eDOWNLOADS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro-5g8-manual.pdf\"\u003eTBS UNIFY Pro Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro-manual-de.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTBS UNIFY Pro Manual (German)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/tbs-unify-pro-5g8-ce-certificate.pdf\" target=\"_blank\" rel=\"noopener\"\u003eCE Certification\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/doc_ce\/id:885\" target=\"_blank\" rel=\"noopener\"\u003eDeclaration of Conformity\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/vtx-table-for-betaflight.txt\" target=\"_blank\" rel=\"noopener\"\u003eVTX Table for Betaflight\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* HAM license is required for operation on HAM channels, and HAM power levels! The VTx ships with only legal channels enabled, please consult the manual on unlocking procedure.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Team Black Sheep","offers":[{"title":"Default Title","offer_id":44162893119702,"sku":"TBS351","price":979.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/DSC00237-ga_20-_20sma1.jpg?v=1682409859"},{"product_id":"mipi-video-cable-for-o3-vtx-150mm","title":"MIPI Video Cable for O3 VTX 150mm","description":"Video  cable for DJI o3 air unit","brand":"iFlight","offers":[{"title":"Default Title","offer_id":44518949748950,"sku":"IFL052","price":339.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/IMG_20231024_113300.jpg?v=1698140427"},{"product_id":"mipi-video-cable-for-o3-vtx-215mm","title":"MIPI Video Cable for O3 VTX 215mm","description":"Video cable for DJI O3 air unit.","brand":"iFlight","offers":[{"title":"Default Title","offer_id":44518951289046,"sku":"IFL053","price":399.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/products\/video-cable-for-O3-air-unit.jpg?v=1698140518"},{"product_id":"blitz-force-5-8ghz-600mw-adjustable-vtx","title":"BLITZ Force 5.8GHz 600mW Adjustable VTX","description":"\u003cdiv class=\"temp-specs-tr\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"temp-specs-td name\" data-mce-fragment=\"1\"\u003eDescription\u003c\/h4\u003e\n\u003cp class=\"temp-specs-td name\" data-mce-fragment=\"1\"\u003eSmall size but big power! The iFlight BLITZ Micro Force is the VTX you need for your next Micro build. Small enough to fit into smallest frames, but enough power to get some signal through some of those dense trees. Switchable from 25mW up to 600mW with excellent Power output stability. PIT mode also allows you to power up your quad with pilots nearby without stomping on their frequency. \u003c\/p\u003e\n\u003cdiv class=\"temp-specs-td value\" data-mce-fragment=\"1\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eTips:\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"temp-specs-td value\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eVTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"temp-specs-td name\" data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/h4\u003e\n\u003cdiv class=\"temp-specs-td value\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePower: PIT\/25\/200\/400mW\/600mW\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAntenna interface: MMCX\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eVTX protocol : IRC Tramp\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOutput 40 channels. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSize: 29*29mm\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMounting pattern: 20*20Φ3\/25*25 mmΦ2\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 4g\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"temp-specs-tr\" data-mce-fragment=\"1\"\u003e\n\u003ch4 class=\"temp-specs-td name\" data-mce-fragment=\"1\"\u003ePacking List:\u003c\/h4\u003e\n\u003cdiv class=\"temp-specs-td value\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 x BLITZ Force Mini VTX\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 set of wires\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e1 x Whip antenna\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"iFlight","offers":[{"title":"Default Title","offer_id":45201821991126,"sku":"IFL064","price":799.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/files\/BLITZ-mini-VTX-1.png?v=1726484694"},{"product_id":"blitz-whoop-5-8g-1-6w-vtx","title":"BLITZ Whoop 5.8G 1.6W VTX","description":"","brand":"iFlight","offers":[{"title":"Default Title","offer_id":46119594197206,"sku":"IFL067","price":1289.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/files\/5.8G-1.6W-Whoop-VTX-1.png?v=1726484689"},{"product_id":"tbs-unify-pro32-dp-mmcx","title":"TBS Unify Pro32 DP (MMCX)","description":"\u003cdiv\u003e\n\u003cdiv\u003eThe TBS UNIFY PRO32 DP (MMCX), is a high-quality video transmitter (VTx) designed for use in fpv drones. It comes with several features like improved robustness, decreased size and power consumption. Enhanced performance and durability through advanced heat dissipation which requires no additional heatsink or fan. \u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eHighlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorld’s lightest 3 Watt video transmitter\u003c\/li\u003e\n\u003cli\u003eFrequency range: 4990 MHz - 6030 MHz\u003c\/li\u003e\n\u003cli\u003eOSD configuration using TBS Smart Audio 2.1\u003cbr\u003e(via Betaflight, TBS Crossfire \/ Tracer or Ardupilot)\u003c\/li\u003e\n\u003cli\u003eOne button frequency and power setup\u003c\/li\u003e\n\u003cli\u003eLUA support for CRSF users\u003c\/li\u003e\n\u003cli\u003eMMCX connector\u003c\/li\u003e\n\u003cli\u003e2-6S input\u003c\/li\u003e\n\u003cli\u003eDouble noise filtering (\u0026gt;63dB SNR)\u003c\/li\u003e\n\u003cli\u003eOptimized heat dissipation, no heatsink required\u003c\/li\u003e\n\u003cli\u003eOptional matching circular polarized antenna available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable border=\"1\" cellpadding=\"1\" cellspacing=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6V - 25V (2 - 6S)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo Input Impedance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e75 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSNR\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;63dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.7g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e37 x 28 x10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAntenna Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMMCX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo Format\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNTSC\/PAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOutput Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10dBm (10mW), 14dBm (25mW), 20dBm (100mW), 23dBm (200mW), 26dBm (400mW), 27dBm (500mW), 30dBm (999mW), Max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eUser Manual\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.team-blacksheep.com\/media\/files\/tbs-unify-pro32-manual.pdf\"\u003eLink\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIncluded\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x TBS UNIFY PRO32 DP 5G8 HV Video transmitter\u003c\/li\u003e\n\u003cli\u003e1x Silicone cable (ends pre-tinned)\u003c\/li\u003e\n\u003cli\u003e1x MMCX to SMA pigtail\u003c\/li\u003e\n\u003cli\u003e1x Heat transfer tape for easy FPV drone mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Team black Sheep","offers":[{"title":"Default Title","offer_id":46179665051862,"sku":"TBS373","price":999.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/files\/UP32DP_render-01-1p_woHS_7d1dc4fe-4346-42af-95b2-a3d8c3e43365.jpg?v=1727346248"},{"product_id":"siyi-hm30-hd-digital-video-transmission-system-hm30-fly-more-combo","title":"SIYI HM30 HD Digital Video Transmission System  - HM30 FLY MORE COMBO","description":"\u003ch2\u003eSIYI HM30 Long Range HD Digital Integrated Transmission Remote Control System\u003c\/h2\u003e\n\u003ch3\u003e1080p 60fps 150ms SBUS PWM Mavlink Telemetry\u003c\/h3\u003e\n\u003cp data-section=\"0\" class=\"tgt color_text_0 un-step-trans\"\u003e\u003cspan data-group=\"0-0\" data-sentence=\"0\" data-section=\"0\" class=\"tgt color_text_0 highlight\"\u003eSIYI HM30 30KM 150ms low delay 1080p full HD video remote control link system is the latest digital transmission technology independently developed by SIYI Technology.\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003eIts rich functionality and powerful performance make it a common device for reliable FPV view and solid control on FPV aircraft, commercial UAVs, unmanned vehicles and boats, and robots.\u003c\/p\u003e\n\u003ch3\u003eSIYI HM30 Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHM30 is a remote full HD FPV system with remote control, telemetry and built-in OSD capabilities.\u003c\/li\u003e\n\u003cli\u003eHM30 uses the 5100 to 5825 MHz band, centered on the 5550 MHz band.\u003c\/li\u003e\n\u003cli\u003eHM30 antenna is interchangeable. Both the ground unit and the air unit use SMA connectors to mount the antennas. Original antenna are: 4 × Omni Antennas (2 for ground, 2 for air), 2 × Directional Antennas (for ground) Sold-alone antenna choices are: 17dB high gain antenna \/ Lollipop antenna.\u003c\/li\u003e\n\u003cli\u003eThe transmitting power of HM30 is about 25dBm \/ 320mW.\u003c\/li\u003e\n\u003cli\u003eEffective range: The latest record is 50km. The range limit is different at different antenna settings and different wireless modes.\u003c\/li\u003e\n\u003cli\u003eHM30 is compatible with all types of flight controllers (to use OSD overlay, flight controller should support Mavlink output), such as Ardupilot, PX4, INAV, etc. If OSD overlay is not required, then any flight controller is compatible.\u003c\/li\u003e\n\u003cli\u003eHM30 is compatible with any type of remote controller that supports S.Bus or PPM output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003e30KM 1080P Full HD Image Transmission system\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eSIYI HM30 HD Digital Video Transmission System applies SIYI’s brand new and cutting edge high-definition image transmission technology with the ability to transmit 1080p 60fps video stream at *150ms low latency. The technology comes with a smart feature to adapt its transmission to better frequency bands, which means it always goes to work on the band with least interference. With the standard omni directional antennas, HM30’s effective range can reach up to 15 kilometers. With the long-range antennas, the range can be up to 30 kilometers with full HD image transmission, real-time telemetry, and stable control.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*The 150ms latency is an average result measured by using SIYI standard IP camera under the following conditions:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eH.265 format, 720p @ 30 fps, displayed in QGC v4.1 (low-latency mode): end-to-end latency is between 130 and 180ms.\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eH.265 format, 1080p @ 30 fps, displayed in QGC v4.1 (low-latency mode): end-to-end latency is between 180 and 250ms.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eSIYI will release a new 1080p @ 60fps camera to effectively lower latency even more.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eOSD Telemetry Display\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eWorking with HM30 video transmission system, SIYI FPV app supports Mavlink telemetry overplayed with OSD display. The OSD display information can be customized. FPV OSD with full HD image will bring you endless fun.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eOLED Touchscreen Display and Configuration\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe OLED touchscreen on HM30 ground unit displays its working status in real-time and supports fast parameter configuration. Much more convenience for outdoor flights!\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eQuick Release Battery, PD Fast Charging\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003ePower supply to HM30 ground unit uses fast-release structure design for popular battery models such as NP-F550\/570\/950 series. Max 30W PD fast charging can be used to charge the battery through the transmitter. You can use a 7 to 16.8 V external power for HM30 ground unit through its XT30 connector.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg draggable=\"false\" height=\"974\" width=\"1224\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-1.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-1.png\" class=\"pb-seo-lazy aligncenter wp-image-17777 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"984\" width=\"1220\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-2.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-2.png\" class=\"pb-seo-lazy aligncenter wp-image-17778 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"1153\" width=\"1219\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-3.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-3.png\" class=\"pb-seo-lazy aligncenter wp-image-17779 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"995\" width=\"1219\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-4.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-4.png\" class=\"pb-seo-lazy aligncenter wp-image-17780 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"847\" width=\"1219\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-5.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-5.png\" class=\"pb-seo-lazy aligncenter wp-image-17781 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"1264\" width=\"1224\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-6.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-6.png\" class=\"pb-seo-lazy aligncenter wp-image-17782 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"887\" width=\"1219\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-7.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-7.png\" class=\"pb-seo-lazy aligncenter wp-image-17783 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"1229\" width=\"1224\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-9.jpg\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-9.jpg\" class=\"pb-seo-lazy aligncenter wp-image-17785 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003cimg draggable=\"false\" height=\"1050\" width=\"1219\" data-src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-8.png\" src=\"https:\/\/worldronemarket.com\/wp-content\/uploads\/2022\/11\/SIYI-HM30-HD-Digital-Transmission-System-8.png\" class=\"pb-seo-lazy aligncenter wp-image-17784 size-full\" decoding=\"async\" loading=\"lazy\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe HM30 Ground Unit is a digital and wireless Full HD image transmission system. The HM30 can reach a range of up to 30km. The 1080p Full HD video connection is done with an MS value of about 150. The transmitter is based on the latest image transmission technology, which was independently developed by SIYI Technology.\u003c\/p\u003e\n\u003cp\u003eDue to its variety of features and strong performance, the HM30 is one of the commonly used devices of reliable FPV viewing and solid control on FPV aircraft, commercial drones, unmanned vehicles and boats and robotics.\u003c\/p\u003e\n\u003cp\u003eThe technology of the HM30 has an intelligent function to adapt the transmission to the frequency bands with the least interference. It is equipped with omnidirectional antennas as standard. These offer a range of up to 15km. With the Long Range antennas, the range can be doubled.\u003c\/p\u003e\n\u003cp\u003eHM30 supports dual RC function. Two transmitters can be connected to a receiver to control flight and payload at the same time. This RC relay function extends the radio control and image transmission range. (These features are still under development and will be available soon)\u003c\/p\u003e\n\u003cp\u003eThe HM30’s OLED touchscreen shows the connection status in real time and supports fast parameter configuration.\u003c\/p\u003e\n\u003cp\u003eThe power supply of the transmitter is equipped with a quick-release device for common battery models (such as NP-F550\/570\/950 series). To charge the battery through the transmitter, a maximum of 30W PD fast charging may be used. The alternative is a 7V-20V external current through the XT30 connector.\u003c\/p\u003e","brand":"SIYI Technology","offers":[{"title":"Default Title","offer_id":46817812021462,"sku":"SY005-2","price":9999.0,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0744\/0753\/files\/SIYI-HM30-fly-more-combo.png?v=1749548370"}],"url":"https:\/\/flyingrobot.co\/collections\/fpv-vtx\/product-availability_in-stock+no_image.oembed","provider":"Flying Robot","version":"1.0","type":"link"}