Cobra C2204 Brushless Multirotor Motor Kv1960

R 300.00 R 360.00

Currently 165 in stock.

Cobra Brushless Multirotor Motors offer performance and value for your mini racing quad. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The Cobra CM2204 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature extended pre-tinned motor leads that are 4-1/2 inches (110mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The newest version of the CM-2204 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

Included with every Cobra CM2204 Series Motor is a complete accessory package which contains the following items:

● Four M3x5mm Motor Mount Screws
● Four M3 Flat Washers
● Machined Aluminum Prop Washer
● Locking Prop Nut with Nylon Insert

Click here for the Cobra CM-2204/32 Propeller Data Chart


Cobra CM-2204/32 Motor Specifications
 Stator Diameter  22.0 mm (0.866 in)
 Stator Thickness  4.0 mm (0.157 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  32 Turn Delta
 Motor Kv Value  1960 RPM per Volt
 No Load Current (Io)  0.58 Amps @ 8 Volts
 Motor Resistance (Rm) per Phase  0.153 Ohms
 Motor Resistance (Rm) Phase to Phase  0.102 Ohms
 Maximum Continuous Current  13 Amps
 Max Continuous Power (2-cell Li-Po)  90 Watts
 Max Continuous Power (3-cell Li-Po)  140 Watts
 Motor Weight  24.6 grams (0.87 oz.)
 Outside Diameter  27.0 mm (1.063 in.)
 Motor Shaft Diameter  3.00 mm (0.118 in.)
 pProp Shaft Diameter  5.00 mm (0.197 in.)
 Motor Body Length  14.2 mm (0.559 in.)
 Overall Shaft Length  32.5 mm (1.146 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8 KHz



Customer Reviews

Based on 1 review Write a review